This is a DIY thermal repair rhinestone applicator that can make shiny rhinestones for your items. Small size and easy to carry.
The non-slip handle design is very user-friendly and provides you with a comfortable experience. The ergonomically shaped handle makes it easy to use.
Equipped with a safety stand and 7 different applicator tips for applying heat-fixed crystals of different sizes. You have different uses at any time.
It only takes 2-3 minutes to heat up and is easy to use. Built-in thermostat, no need to adjust the temperature. With power switch, easy to control and use.
Application: Suitable for all flat fabric materials, suitable for most types of crystals/studs/beads.
Product
Technical specifications:
Material: ABS shell
Purple
Manual:
1. Insert the applicator and open it. Hold it for 2 minutes.
2. Place the tip with the stone on the stone and then pick it up.
3. Observe the glue until it becomes wet and shiny. Now you can apply the stone to the surface. Depending on the size of the rhinestone, it may take about 5 seconds or more.
4. Gently press the applicator at a 90-degree angle to the surface. Move the applicator up and away. If the stone sticks to the tip, use tweezers to push it down into the grooves of the tip to remove the stone.
5. If the stone is not properly glued, place the cap on the stone for a few seconds to melt the glue again.
Scope of delivery:
1 x rhinestone applicator
1 x bracket
7 x interchangeable precision tips
Includes accessories: 1 drill, 7 specifications of hot stamping heads, 1 drill holder, 1 stainless steel tweezers, 1 box of 2000 rubber bottom hot stamping drills, 1 cleaning brush, 2 drilling pens and 1 storage bag Machine power: 10-12W Machine voltage: 110-220V Machine color: Purple (with power switch) Hot stamping specifications: There are seven types of hot stamping heads, and one hot stamping head cannot only heat one size. Large hot stamping heads can also heat small drills 2mm(SS6-SS8), 3mm(SS10-SS12), 4mm(SS16), 5mm (SS20) flat head/HOT SPOT 5mm(SS20), 7mm(SS34), 9mm (SS50) flat head/FLAT 9mm