TFT LCD Screen for Huawei P30 Pro with Digitizer Full Assembly, Does not support fingerprint identification Notes before installation 1. Tip 1: Test before installation When testing, do not remove any protective films or labels. Pay attention to the problem of static electricity. Before attempting to repair anything, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components of the phone. Make sure to wear eye protection and be careful not to cut yourself on broken glass. 2. Tip 2: Simulate testing Screen replacement is a very fragile product. We strongly recommend testing before installation. Please simulate testing, which means the mobile phone is disassembled, (motherboard + LCD or screen) connected audio cable and new replacement, power on, the test is complete. If the test is OK, please install it. If it cannot be displayed, please contact us immediately. And do not force it to be installed in the mobile phone. We will not be responsible once the screen is installed. 3. Tip 3: Do not bend the cable too much Make sure the LCD cable is not bent too much. Bending over 90 degrees will cause a black screen. About the product 1. Replacement LCD screen + touch screen digitizer assembly for Huawei P30 Pro 2. Replace your broken or unusable item with a new one 3. Make your device look fresher than ever 4. Perfect fit and working 5. Each item has been checked and is in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed 7. Note: No fingerprint recognition