Description: Hand washing is essential during cooking. If our hands are covered in grease or if we have handled raw meat or poultry, the touchless soap dispenser can conveniently provide soap without contaminating your hands. The automatic soap dispenser with a smart infrared sensor gives you a hygienic, touchless, and easy-to-use experience. Features: [Smart Infrared Sensor] The touchless soap dispenser has a built-in precise infrared sensor and it only takes 0.5 seconds to dispense the liquid. [Adjustable Soap Volume] 1 ml is pumped out each time. If you need more, hold your hands and wait another 2 seconds, and it will pump out again. [Leak Protection] The sealed rubber material on the bottom of the soap container prevents soap from leaking out and keeps the container in place on the countertop. [IPX6 Waterproof] Touchless soap container with IP67-rated deep waterproof technology to prevent soap or water from corroding the circuit board. [Visible Window] A visible window serves as a reminder to check the remaining liquid and refill soap in time. Specifications: Color: Light Brown; Dark Brown; Silver (This one has no stripes, the picture is reflective); Blue (Optional) Material: ABS Style: Modern Usage Mode: Infrared Induction Induction Distance: 2-3 inches Capacity: 300 ml Waterproof: IPX6 Temperature: 3-40 ℃ Operating Voltage: DC 6V Power Supply: 4*AAA battery (not included) Application Area: Kitchen, bathroom, hotel, bank, hospital, etc. Product Size: 7.2*14.2*22 cm/2.83* 14.5 * 7.5 * 22.3 cm / 5.7 * 2.95 * 8.77 inches Package Weight: 333 g / 0.73 lb Package Contents: 1 * Automatic Soap Dispenser 1 * User Manual Warnings 1. Follow the instructions or directions on the product itself to insert a battery with sufficient capacity, otherwise the soap dispenser will not work. 2. Make sure the liquid cap is properly attached. Otherwise, the liquid will leak out. 3. Do not use soap that is too viscous, otherwise it will not flow smoothly or cannot be emptied; too thick soap can be diluted by adding an appropriate amount of water before use. 4. When using it for the first time, you can use the water test to remove the air inside. 5. The first time you use it, try a few times first. Then the liquid will fill the hose and flow out. 6. When the light flashes, it means the battery is low. Replace the batteries. 7. If the product is not used for a long time, check if the internal soap liquid has deteriorated. The deteriorated soap liquid can cause the outlet to be blocked and the liquid cannot flow out. 8. DO NOT SHAKE the units to avoid serious damage. 9. The product is tested before leaving the factory. It is normal for the product to have water droplets when you receive it.