Specification: 1) Distance: 50-150 meters.

2) Very small size: 5.5 cm x 4.5 cm x 1.0 cm.

3) One receiver can process 400 codes.

4) It does not interfere with other remote controls and receivers.

5) Brand selector: There are 8 dip switches, and users can make different combinations for different remote controls. Power input selector: This receiver can work at AC/DC 9V~30V. However, it is best to change the PIS based on the actual input. If the input is greater than 24V, short circuit pins 2 and 3; If the input is less than 24V, short circuit with 1 and 2.

Color: White+Black

Material: ABS

Programming for a new remote control

1) Select the correct brand of the remote control to be programmed by moving the dip switch up or down. For a 433.92Mhz remote control, simply move dip switch 7 up.

2) Press the learning button. The LED will light up.

3) Press the button on the remote control, and the LED will flash 4 times. This means that the remote control has been successfully programmed.

4) Repeat for another button.

5) The programming process for the second channel is the same.

Clear all data from the memory card: Press and hold any learning button. The LED will start flashing. Keep the button pressed until the LED goes out. All data stored on the memory card will be permanently deleted and cannot be recovered

Shareable

All 433.92mhz fixed code remote controls.

Package contents:

1 x Receiver

3 x Remote control

With the concept of customer first, we provide you with 24/7 customer service. No matter where you are or what problems you encounter, we will solve them for you as soon as possible to ensure that your shopping experience is worry-free.