Two styles compatible remote control compatible HORMANN ECOSTAR 100% compatible with ECOSTAR RSC2 ECOSTAR RSE2 Feature 1. Free battery 2. Free coding instructions 3. Free keychain 4. Heavy duty 5. Built-in battery 6. Button protection 1. Programming type: Programming with the receiver 2. Number of channels: 4 3. Code: rolling code 4. Frequency: 433.92 mhz 5. Range: 10-50 m (open area) 6. Power: 12V 27A 7. The remote control comes with battery 8. Modulation mode: ASK (AM) 9. Power: 100mW 10. Working temperature: -20 C to +50 C Secure use: dynamic code provides a high level of security, code that cannot be copied. Disclaimer: Your old remote control must be the same as advertised, new remote control is not compatible with other remote controls. Includes: 1xRemote control 1xBattery 1xKeychain 1xEnglish manual How to program You must press a button on the receiver (under the cover or next to the motor in a separate box) and then press a button on the new remote control to register it. Required materials Compatible programming: Your receiver 1. Open your receiver from the garage door. 2. Press the programming button. The inscription is usually: ENR, MEMO or PROG. 3. On some receivers, it is necessary to hold down the programming button. 4. On the receiver, the LED indicates that the programming mode has started. 5. Press compatible for one second on a button on the new remote control and release it again. 6. The receiver's LED lights up differently or goes out to indicate successful programming. 7. Wait a few seconds to exit programming mode. Congratulations Your new remote control is programmed