Note: Clean the surface thoroughly and let it dry. This is very important. Dry for at least 24 hours without contact with water.Healthy and environmentally friendly soft silicone material, durable, wear-resistant, flexible, and waterproof.You can use the cutter to cut freely, and the length is suitable for various scenes.The curved ones can be bent, but not at right angles. At corners, they can be cut according to the situation.Waterproof strip is mainly used for the bottom of the bathroom door and kitchen counter, the side of the pool, the side of the stove, if it is on the countertop, it is recommended to cut and splice the installation.Product DescriptionColors: WhiteMaterial: environmentally friendly siliconeSize: 2.5x1.5cmLength: 60cmHow to do:1. Wipe away water and dust on the floor.2. Determine the position of the water-retaining strip and mark it with a pen on the floor.3. Remove the adhesive and install the water barrier in the marked position.4. Seal the rubber strip at the position where the two ends of the water-retaining strip are in contact with the wall.5. Apply glue to both sides of the water stopper and apply evenly.Notes:1.The product is not equipped with glue. It is recommended that the customer purchase glue and glass glue for reinforcement, which can last a long time.Package contents:1 x Water-retaining stripOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.