Operating voltage - 12V 27Ax1 (battery included)Transmission distance - 5-50m in open space. Open space means no interference. No walls, no doors, no other obstacles. Interferences such as garage doors or brick walls can significantly reduce the remote control's range.Compatible with4014 TX03-434-24022 TX03-434-24013 TX02-434-4-XPSpecification:Green LED and Orange LEDDecoder IC - Rolling codeFrequency - 434.42MHzTip: Third-party productionNote:Receiver access required. Make sure you have access to your receiver/opener before purchasing.Disclaimer: Your remote control must be the same as the picture and your model must be listed, we are not responsible for incorrect purchasesProgrammingThe remote control has the same function as your remote control. It should be programmed with the receiver according to your manual when you do so.1. Locate the Learn / Code Set button on the motor. This is usually located under the lamp cover or on the back of the motor.2. Press the Learn / Code Set button once and then release. A light should illuminate.3. Press the desired transmitter button once, and the light will turn off.4. Press the remote control again, and the light on the motor will flash and then turn off, meaning the remote control has been coded.5. Test the remote control's function.Material: plastic+metalColor: MulticolorPackage contents:1 x Remote controlOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.