Compatibility: The universal gate remote control is compatible with rolling code and fixed code radio controllers and receiving centers with frequencies from 250 to 915 MHz. Compatibility extends to more than 60 brands on the market.



4-in-1 rolling code door remote control: The universal gate remote control can store up to 4 radio control codes, regardless of brand or model series. By copying the code directly from the original remote control, you get a remote control that can open up to 4 different automations.



Easy to use: improves the signal, the distance is 50 to 100 meters outdoors and without obstacles. Can remotely open garages, blinds, electric door light controls, motors and water pumps and other areas that require privacy and security.



Specifications:



Working frequency: 250MHZ-913MHZ



Working current: <15mA



Starting distance: 50 meters to 100 meters in open space



Encoding format: copy, copy



Product weight: 25G



How to use:



Code clearing method



Press and hold the two top buttons simultaneously for 2 seconds. If the remote control's indicator light flashes quickly, it means the code has been cleared successfully.



Fixed code and ev1527 chip copying method:



1, hold down the a and b buttons simultaneously, release the B button, press 3 B buttons continuously



2, after releasing 2 buttons, the LED flashes red



3, long press the buttons on the original remote control, wait until the red light on the copy remote control flashes blue



4, short press the first button on the copy remote control to confirm the copy (Note: copy to which button and then press which button to confirm the copy, for example, you want to copy the remote control to the B button, at this time you must press the B button to confirm the copy)



5, the LED light goes out, indicating that the copy was successful



6, the rest of the buttons repeat the above operation.



Rolling Code Chip Copying Method:



1-6 Same steps



7, When the copy is complete, re-learn the copy remote control with the receiver (Pair Code) for normal use.



Remote control operation method with receiver code:



1. Find the pair code button on the receiver or set the input: Find the pair code button on the garage door motor on the motor housing; Smart home hosts may have a small hole on the back or side of the device and need to long press a tool such as a toothpick to enter pair code mode.



If the receiver does not have an entity code button, you may need to enter the code-to-code setting interface via the device's control panel, phone app.



2. Press the pair code button on the receiver and then press the corresponding button on the remote control (for example, the door opening button, the door closing button and other common function buttons), at this time the receiver and the remote control match the signal and the pair code.



If you perform a pair code via the mobile app, find the corresponding function option in the app, follow the instructions.



3. Press the corresponding button on the remote control again, the receiving device



Note: All data are measured manually, please allow 1-3 cm error, due to differences in light and display, there may be some color differences, please refer to the actual received object.