Name: Electronic Drain Valve
Model: 507292
Indicator light: LED indicating on/off
Voltage range: +/-10%
Protection class: IP65
Insulation: class H
Maximum working pressure: 1.6Mpa
Maximum temperature: 90 Celsius
Temperature: -40 Celsius to 60 Celsius
Maximum current consumption: 4mA
Power supply voltage: 24-240V AC/DC 50/60Hz
Discharge time (ON): 0.5--10 seconds
Time interval (OFF): 0.5--45 minutes
Widely used in filters, separators, dryers, tanks, drip legs and other components of compressed air systems
Clean the installation of the compressed air system.
Note the direction when installing the valve: the outlet must not use a hose that cannot withstand the impact of air.
The power supply voltage should be the same as the drain valve's voltage: the positive pole must be connected to terminal \"1 \" when using DC.
When the drain valve is connected to the cable, brown is L (phase), blue is N (neutral), and yellow-green is GND (protective earth).
Make sure to tighten the long screw on the junction box to prevent water from burning.
Warning! When installing the electronic drain valve, make sure that:
The compressed air has been drained (i.e., under zero pressure).
The power supply has been turned off.
Color: Gold + black
Material: metal
Size: flow: 5 mm
In/outlet port size: 1/2 inch
Package contents: 1 x Electronic drain valve
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.