Condition: 100% Brand New

Item Type: Spray Cooling System
Material: PE

Weight: Approx. 1654g / 58.3oz

Plug: EU Plug

Diaphragm Pump Description:
Voltage: DC12V
Current: 60W
Pressure: 0.8Mpa
Water Flow: 5L/min

Scope of Application:
1. Wetting and rust removal
2. Air humidification
3. Chemical treatment
4. Chemical spraying
5. Liquid spraying
6. Leaf humidification
7. Tablet coating
8. Flue gas evaporative cooling
9. Cleaning
10. Component cooling
11. Fruit wax spray
12. Glass plates
13. Factory humidification
14. Smoke test
15. Artificial fog
16. Humidification in other places

Installation Steps:
1. It is recommended to install the atomization system at a height of 2.5-3m.
2. Turn on the faucet to clean for 1 minute to clean the impurities in the system.
3. Screw the spray nozzle onto the T-connector except for the one at the end.
4. Turn on the faucet to clean for 2 minutes to ensure the system is completely clean.

5. Turn off the water and install the last nozzle on the joint and use the end plug.
6. Fix the atomization pipe with the provided saddle clamp for cable ties.
7. Connect one end of the provided water inlet pipe to the water inlet of the pump and put the other section into the bucket.
8. Connect the water outlet pipe to the water outlet of the pump and the arrow on the pump cover points in the direction of the water outlet.
9. Turn on the power of the water pump until the sprayer works and enjoy the cooling atomization system.
10. When the atomization system is not used for a long time, close the nozzle and keep it dry and clean.

1 x 12V Diaphragm System

Customers are our top priority. If you find any problems with your product after receiving it, such as damage or incorrect quantity, please contact us immediately. We strive to provide you with the best after-sales service.