Product Name: Modified Car Exhaust Pipe.

Model: Single Tube, Bright Silver, Straight Model

Material: Stainless Steel

Suitable for vehicles with a displacement of 1.5 to 2.2 liters and a rear throat shape: Straight

Universal rear throat, suitable for most models on the market with an exhaust pipe diameter between 5.3 and 3.8 cm [excluding smaller sizes]. You can choose according to your vehicle's exhaust pipe. If the exhaust pipe is straight, choose the straight model; if it is straight, simply choose the curved version.

[Check if the rear throat fits]

The inner diameter of the rear throat interface is 63 mm.

Measure the outer diameter of your car's exhaust pipe; it can be used if it is less than 58 mm.

Installation method: Use a screw connection. After loosening the screws on the exhaust pipe, place the exhaust pipe in a suitable position on the end of the car's exhaust pipe, then tighten the screws with a wrench. It only takes 5 minutes to do it yourself!

Kind Tips】

1. The distance between the rear bumper groove and the bumper should be greater than 2 cm to prevent the bumper from being damaged by the high temperature of the exhaust.

2. Wear gloves during installation to avoid minor injuries.

3. Do not install this product when the car has just stopped or started to avoid being burned by the exhaust pipe.

Note: data are manual measurements, please refer to the manual measurements.

Please allow an error of 1-3 cm. Due to differences in lighting and screen settings, there will be some color variation. The specific product in kind prevails.