FeaturesMaterial: PP resinSize: 36x36 cmLay out the effect like laid paving stonesSo the path becomes more exotic, to create your own style on the garden path.Color: BlackDIY plastic mold for casting paving stones is spread in Europe and America, is a personalized brick moldHow to use this concrete paver mold to build paths:Step 1: Mix cement with water according to package directions. When ready to use, the concrete should have the consistency of oatmeal and be thick enough to hold an edge when cut with a shovel.Step 2: Fill the paving mold, scoop the concrete in with a shovel, making sure to fill each area.Step 3: Use rubber gloves to spread the concrete around the mold, filling in any gaps or low spots. Tap the mold with your hand to eliminate any air bubbles.Step 4: Smooth the concrete along the contours of the mold and wipe away any excess.Step 5: Let the concrete set for a maximum of five minutes, then carefully remove the mold. For the next section, rotate the mold a quarter turn and place it next to the newly made paving, angling it slightly if you are creating a curved path.Step 6: After the concrete has cured overnight, fill the cracks with soil and wash away any excess. Moisten the ground around the newly formed paving to help them settle.Package content: 1 x Concrete paving mold