Working principle, the capacitor moves the charge, the equalization board is connected to the battery, and the equalization is started. The pre-original new ultra-low internal resistance MOS, 2OZ copper thickness PCB.
Equilibrium current 0-5.5A, the more balanced the battery, the smaller the current, with manual sleep switch, the quiescent current is less than 0.1mA, the balancing voltage accuracy is within 5mv!
The static current is about 12 mA. It is recommended that the battery capacity is 60-300AH.
With undervoltage protection, the voltage will stop automatically when the voltage is lower than 3.0V, and the standby power consumption is less than 0.1mA.
Voltage display 6S, the accuracy of a single string is 0.001V, and the total voltage is 0.01V.
3D printing shell, some parts are slightly defective, please do not buy if you mind!!!
Working voltage: 2.7V-4.5V
Suitable for ternary lithium, lithium iron phosphate.
Why a balancer is needed:
As the battery cycle times increase, the battery capacity decay rate is inconsistent, causing the battery voltage to be severely unbalanced. The battery barrel effect will cause the battery to be charged. The BMS system detects that the battery has entered overcharge protection in advance. In fact, only one of the batteries is full, or let the BMS system detect that the battery enters the overdischarge protection state, which is actually caused by the overdischarge of one of the lower voltage batteries. After the device acts, each battery voltage reduces the capacity attenuation caused by the battery barrel effect and prolongs the problem. The battery pack has a service life.
Due to different product batches, the appearance may vary, which does not affect the use.
Colour: Red
Material: Plastic
Package Contents:
1 * Balancer
Only the above package content, other products are not included.
Note: Light reflection