For OnePlus 10 Pro TFT LCD Screen with Digitizer Full Assembly, Does Not Support Fingerprint Identification Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective films or labels. Pay attention to the problem of static electricity. Before attempting to repair anything, make sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and be careful not to cut your finger with glass splinters. Tips 2: Simulates testing Screen replacement is a very fragile product. We strongly recommend testing before installation. Please simulate testing, which means the mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it cannot be shown, please at the first time. And do not force it to be installed in the mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not bend the cable too much Please make sure the LCD cable does not bend too much. Over 90 degrees bending will cause black screen. About the product 1. Replacement LCD screen + touch screen digitizer assembly for OnePlus 10 Pro 2. Replace your broken or unusable item with a new one 3. Make your device look fresher than ever 4. Completely fit and work 5. Each item has been checked and is in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed 7. Note: Does not support fingerprint identification
Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurements. Sold by-YJL official store