Welcome to the store!
1. When the servo is continuously blocked or the load blocking angle is greater than 3 degrees, it lasts for 10 seconds and the current is kept at 2.5A or more, the protection starts. 2. The load blocking protection makes the locking force reduce to half, after the load blocking is removed, the servo returns to normal when the remote control rotates at will. 3. The default value of the remote control is 90 degrees, the maximum is 120 degrees, supports the control board 0.5‑2.5ms, the angle is 180 degrees. 4. Applicable to remote control car, climbing car, single-chip microcomputer control robot, manipulator, etc. 5. The steering gear uses stainless steel gears, which are not easy to wear, rust-resistant, long service life.
Item Type:28KG Servo
Material:Aluminum Alloy+Plastic
Color: Blue
Size: Approx.41x37x21mm/1.6x1.5x0.8in
Weight: Approx. 90.0g/3.2oz
Working Voltage: 4.8-8.4v
Working Temperature: -10 degrees Celsius to +50 degrees Celsius
Dead Zone: 2μs
Remote Control Angle: 90 degrees
500-2500μs Angle: 180°
Fitment:
Fit for 1/8 RC Car
Fit for 1/10 RC Car
Fit for Single-chip Microcomputer Control Robot
Fit for Manipulator
How to Use:
1. First install the steering gear to the steering gear base, without installing the steering gear arm or the steering gear protection. Just fix the steering gear to the frame. Then connect the servo to the receiver, usually CH1 or forST socket.
2. After the steering gear is fixed, turn on the remote control and turn on the ESC after setting it, and then the steering gear will stop in a fixed position
3. Without turning off the remote control and the steering gear, install the steering gear protection or the steering gear arm to the steering gear output gear, install the steering gear protection or the steering gear arm to the steering gear output gear
1 x28KG Servo
4 xServoArm
4 x Damping Pad
5 x Screw
4 x Screw Sleeve
1 x Manual
Your satisfaction is our highest priority. We will provide you with the best service. If you find any problems after receiving the product, such as damage, incorrect quantity, etc., please contact us immediately and we will provide you with the best solution!