The push rod is driven by a DC motor with a screw drive. The telescopic rod can only be retracted but not rotated.
The motor is positive and negative. For example, if the positive electrode is extended and the negative electrode is contracted, you can change the direction of the rod's expansion and contraction by changing it.
Temperature -10°C to +50° vs. Standard protection level: IP54. Low noise, the sound is less than 50 dB. Please do not disassemble the machine.
Product features: drive other objects to push, pull, lift and lower.
Product application: TV lift tables, massage tables, electric beds, armchairs, electric equipment, microphone type equipment, electric sofas, camera stands, cameras, etc. Features: This miniature linear actuator is used in industry, agricultural machinery, construction, sweepers, ships, freight and many other applications.

It can be replaced by hydraulic products and pneumatic tires, which is very suitable for saving energy.
Specification:
Travel distance: 100 mm
Speed: 30 mm/s
Input voltage: 12 V DC
Duty cycle: 10 %
Technical parameter:
Each side of the push rod contains a limit switch. When the telescopic rod moves up or down, the power supply is automatically disconnected.
The motor does not idle. Turn off the power, can stop in any position, with self-locking function.
Note:
Confirm whether the motor voltage is correct for use. If it is a DC motor, also check whether the power supply current is sufficient. Do not store or use in a high temperature or humidity environment, do not place it in corrosive gas, otherwise it will reduce the motor efficiency. Motor positive and negative When the terminal needs to be soldered, the temperature of the soldering iron is 340°C±40°C. The heating time is 3 seconds.
Do not deform the plastic.
Material: Metal
Color: As shown

Package content:
1 x 30mm/s DC Micro-type Electric Push Rod 12V
2 x Support

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.