Description
Color: silver
Specifications: diameter 38 mm
Lock body material: zinc alloy
Lock body diameter: M19 mm;
Thread length: 20 mm (short); 30 mm (long)
Applicable for plate thickness of 1-15 mm respectively. Suitable for plate thickness of 1-23 mm.
The factory password is: 000
Made of zinc alloy, strong, precise, safe and durable. The lock plate is thickened to about 2 mm, which effectively increases the service life.
The surface is galvanized and polished, and the color is pure. Available in 2 colors, the surface is smooth and flawless.
This combination lock has 1000 combinations to keep your security cabinet or safe secure enough.
Easy to install. The length can be adjusted by turning the nut. No mounting screws are required, the lock snaps directly into the cabinet.
How to change the password: There is a hole to change the password at the bottom of the lock. In the open position, use a small stick to cover the hole, do not release it.
Then change the password, release it when you are done, and the password change is complete. Just scramble the password after you lock it.
Area of use: mailbox/cabinet/shoe cabinet/staff locker/storage cabinet/wooden cabinet, etc.
Instructions for use: The factory password for this lock is 000, i.e. three zeros. For first use, set the password to 000, then hold the lock body with one hand (the threaded part, pinch the two parallel surfaces with your fingers), and rotate the lock's surface with the other hand (i.e. the beveled surface with lines), clockwise or counter-clockwise 90 degrees. (The first time you use it, you need to be a little stronger, and it will be easy to turn it a few more times)