Description

Metal Car Dent Repair Tool, Dent Remover, Car Body Suction Cup, T-Puller + 18 Tabs

Features:

It is made of metal for strong strength and long durability.

A necessary component for dent repair, direct replacement for the broken one.

Easy installation, the thread size is M10 for better application.

Specification:

Material: Metal

Color: As the picture shows

Type: M10

Size: As the picture shows

Package includes: T-Puller + 18 Tabs

How to use these paintless dent repair kits:

1. Clean the dent with a clean, wet cloth

2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter the glue gun, connect the power source and preheat for 5 minutes

3. Use a suitable pulling tab. Large dent requires a large pulling tab. (Note: The larger the pulling tab, the greater the pulling force)

4. Pull the trigger and apply the pulling tab with extruded glue (The 4 holes in the tab should be applied with hot melt glue)

5. Quickly place the pulling tab with hot melt glue in the center of the dent, press lightly until the glue hardens and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly shorter in winter)

6. Align the T-shaped repairer and press the pulling tab with hot melt glue, pull the slide rod backward to pull up the dent

7. Check with a line board. If the dent is still there, tap it lightly with a leveling hammer or pen

8. Clean the repaired spot with a clean, wet cloth