1. New, never used.
2. 175~185 degree electric fan thermostat relay switch kit, it is a 3/8 inch pipe thread.
3. This kit includes everything you need to connect to your fan.
4. Turns on at 185 degrees and turns off at 175 degrees.
5. This kit is set to turn on your electric fan at 185 degrees and turn off at 175 degrees and works with all 12 volt systems.
Fits: Compatible with 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines
Instructions:
Note: For the two red wires, connect the short red wire to the fan and the long red wire to the battery.
1. Mount the relay under the hood in a suitable location as close to the fan as possible.
2. Install the thermostat in the cylinder head or intake manifold. Pull the black wire to the thermostat and cut to the correct length. Crimp the red terminal onto the black wire and attach it to the thermostat.
3. Pull and connect the red wire to the fan's \"+\" terminal or the power cable from the fan motor labeled \"to electric fan\".
4. Mount the included switch in a suitable location as close to the power source as possible.
5. Neatly route the red wire from the relay to one side of the switch installed in step 4.
6. Route the brown wire to the ignition switch or fan switch, whichever is most convenient.
Voltage: 12V DC
Color: As shown
Material: Plastic + Metal
Package Contents:
1 x Fan Temperature Switch
1 x Brass Adapter
1 x Sensor Wires
1 x Relay Switch
1 x Power Switch
7 x Terminals
3 x Mounting Screws
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.