Description

【Unique Design】315/433Mhz RF Wireless Remote Control Switch. Stable and reliable performance, receiving sensitivity (>-112dBm). A strong signal can pass through walls, floors, doors. It can pass through walls, floors, and doors, controlling the receiver from any place within a reliable distance. The maximum range can reach 100m without obstacles.

【Easy to Use】: Extremely easy to install and reset. There are 3 working modes (momentary/toggle/latched mode) to choose from. You can easily configure it yourself according to your needs. The working mode of the product is adjustable. This item has already been configured in latched mode. And the \"ON\" button to turn on and the \"OFF\" button to turn off.

【High Sensitivity】The receiver uses a 30A relay. Can load high-power electrical appliances to ensure long-term stability control. Each receiver can store about 20 transmitters. And one transmitter can also control multiple receivers (the transmitter must match the receiver).

【Wide Application】Products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely control every device connected to the relay receiver via the remote control. e.g., lights, pumps, wireless security alarms, fans, lamps, ventilation devices, monitors, printers, fountains, and other electrical equipment, etc.

【Strong Signal Reception】There is an antenna on the receiver, so you can extend it yourself to get stronger signal reception. The remote control distance can be up to 100 meters.

【More Flexibility】Extremely easy to install and reset. You can easily add additional wireless switches yourself according to your needs.

Product Parameters

AC 85V~265V 30Amp

Voltage: AC 85V~265V

Max current: 30A

RF frequency: 315/433MHz

Encoding support: 1527 learning code

Receiving sensitivity: >112dbm

Latched mode

Press the \"ON\" button, the relay turns on; Press the \"OFF\" button, the relay turns off.

Installation

Press the learning button (on the receiver) 3 times. Wait 3 seconds;

Press the \"ON\" button on the remote control. Wait 3 seconds.

Press the \"OFF\" button on the remote control. Succeeded.