Features:

The helicopter swashplate corrector, adjusting the aircraft does not rely on luck, the corrector can make your swashplate in place. Other adjusters on the market need to remove the spindle, but we do not need to remove the spindle.

Note: This product is adjusted by adsorbing the spindle, such as the spindle does not contain iron or the content is very little can not be used, so you can first use magnets to adsorb the spindle of your own aircraft, if you can adsorb you can buy, can not only replace other tools.

Method of use:

1. Press the magnet and hold the spindle

2. Press the swashplate corrector to touch the spindle at two points

3. Gently pull the magnet out of the spindle

4. Move up and fit the lower edge of the swashplate so that there is no gap between the swashplate and the tester, which represents the level.

Especially for helicopter of the item.

Small for: (380/450/470) helicopter

Large for: (500/550/600/700/800) helicopter

How to use:

1 Press the magnet attracts the spindle

2 Press Swashplate measuring device to two o 'clock touches the spindle

3 Gently pull the magnet, so the magnet away from the spindle

4 Move along the swashplate fit, so the swashplate directly without gap measuring device, namely the level of the Rotor head without disassembly, easy to use better.