Features:
1. Protection Rating: Our fuel level sensor has an IP67 protection rating and an alarm switch with a rating of 500mA.
2. 316 Stainless Steel Material: The fuel tank sending unit is made of heavy-duty 316 stainless steel. The craftsmanship is exquisite, the cable is made of PVC, and the float is made of NBR.
3. Reed Switch: This water level sensor is a reed switch, durable and reliable, with stable output signal. The tank does not need to be adjusted.
4. Wide Application: The fuel level sensor is suitable for boats, cars, trucks, buses, and marine areas. Suitable for oil level gauges, water level gauges, and all unadulterated liquids.
5. Easy to Install: The fuel level transmitter comes with a washer, mounting screws, written and illustrated instructions, and easy-to-understand wiring instructions.
Specification:
Item Type: Fuel Level Sensor
Material:
Main Body: 316 stainless steel
Cable: PVC
Float: NBR
Mounting: Standard SAE 5 hole type
Screw Size: M5 x 0.8
Hole Diameter: 5mm / 0.20in
Product Specification: Approx. 150mm / 6in
Recommended Tank Size: Approx. 160-178mm / 6.3in-7in
Output Signal: EU standard 0-190ohm (0ohm at no load, 190ohm at full load)
Resolution Range: Approx: 10mm/0.39in
Fuel and Water Level Sensor Type: Resistance
Alarm Switch Rated Current: 500mA
Protection Level: IP67
Operating Temperature: -40F - +185F (-40C - +85C)
Application: Ships, Yacht, Truck, RV
Package List:
1 x Fuel Water Level Sensor
5 x Screw
1 x Washer
Note:
Installation takes about 15 minutes total to get your power meter working again. To prevent the transmitter from hitting the bottom of the can, the length of the transmitter should be 1 inch less than the depth of the can if it is a plastic can, or 0.5 less than the depth of the can if it is a plastic can.