This is for 1 pc 7-pin electronic 12V flasher relay for LED indicators for Suzuki motorcycles
Can fix flash rate issues when switching from standard bulb to LED indicators or less powerful standard bulbs
1 flasher relay supports 4 indicators (2 pairs, front and rear)
This flasher relay control solves LED light related turn signal problems such as hyper flashing, no flashing, or burnt out bulb warning message on the dashboard or simply replaces a bad relay
Designed for most Suzuki motorcycle configurations
Easy Plug & Play installation; replaces all standard Suzuki 7-pin and 8-pin flasher relays
This flasher relay works with conventional incandescent bulbs and/or LED bulbs or a combination of both.
Perfect for replacing a bad relay or correcting LED turn signal problems (fast flashing, no flashing)
Specification:
Size: 40 mm x 23 mm x 32 mm
Working voltage: 12-15V
Switch load: 0.1 - 100W
Flash frequency: 90 times per minute
Connection: 7-pin and 8-pin for SUZUKI socket
Installation:
Plug and Play - just unplug your old flasher relay and plug in the new one - problem solved
May fit the following Suzuki models: (Fits most Suzuki post-2000s motorcycles)
- DR-Z 400S / SM (2000-2010)
- GSXR 600, 750, 1000 (2000+)
- SV 650, 1000 (ALL YEARS)
- GSX 650F (ALL YEARS)
- TL1000R (NOT S) (ALL YEARS)
- Hayabusa GSXR 1300 (ALL YEARS)
- Bandit 600, 1200, 1250 (ALL YEARS)
- GSF 600 1200 (ALL YEARS)
- GSF 650 1250 (ALL YEARS)
- GSX 1400 (ALL YEARS)
Important information about this LED flasher relay: The LED flasher relay does not replace all flasher relays. Before ordering, make sure that the 7-pin or 8-pin configuration is the same as your vehicle's. You can usually find your flasher relay connection printed directly on your flasher relay. Failure to check this and installation in an incompatible vehicle can burn your fuse, destroy the flasher relay and void the flasher relay's warranty.
Package included:
1x 7-pin Suzuki flasher relay for LED indicators