Features: 1. The diagnostic interface is USB port based, so there will be no compatibility problems with serial to USB converters. 2. The communication speed over the USB-BUS is sufficient to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason why only the USB-port based interface is available for CAN-BUS. 3. The program supports many control units, such as engine, automatic transmission, ABS, airbag, engine cooling module, instrument cluster, electronic climate control, body control unit. 4. The program supports many control units, such as engine, automatic transmission, ABS, airbag, engine cooling module, instrument cluster, electronic climate control, body control unit, to name a few. Since many pins are used in the Opel OBD connector, the diagnostic interface works as a multiplexer and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000) 5. Fault codes will be displayed with all available information: Full status information (Present, Not present, Intermittent) 6. The program shows measuring block information on many control modules, you can choose what you want from the list. 7. You can also run output tests on many controllers. PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN - Two-wire, High Speed CAN-BUS, 500 kbps MSCAN - Two-wire, Medium Speed CAN-BUS, 95 kbps SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps Includes: 1 x OP-COM Interface 1 x USB Cable 1 x CD