Hot deals! Guaranteed product, quality service and exclusive offers. Buy now and we will deliver your item to you as soon as possible, have a nice day! Features: and high quality PTM7950 is a super high thermal conductivity phase change material (PCM) in both pad and paste formats. It is designed to minimize thermal resistance at interfaces, maintain excellent performance through reliability tests, and provide scalable application at a competitive cost. Based on a new polymeric PCM system, PTM7950 exhibits excellent wettability at interfaces over typical operating temperature ranges, resulting in extremely low surface contact resistance. PTM7950 is a patented material that provides superior reliability (passes 150˚C baking 1000 hours, T/CB 1000 cycles) and maintains low thermal impedance (<0.04˚Ccm2/W @ no tray), making the PTM7950 series desirable for high-performance integrated circuit devices. Product application: Clamping pressure and temperature are required to achieve a minimum bond line thickness of the thermal interface material, typically less than 1.5 mil (0.038 mm) for best performance. The material must pass through the phase change temperature to exhibit proper performance. Specifications: Material: silicone Dimensions: 31X50MM, 40X40MM, 40X80MM, 80X80MM, 80X160MM (optional) Thermal impedance: 0.04˚C-cm2/W Thermal conductivity: 8.5 W/mk Thickness: 0.25 mm End of line 0.04˚C-cm2/W Baking 150˚C, 1000h 0.04˚C-cm2/W Double 85, 1000h 0.04˚C-cm2/W Temperature cycling 'B'(-55˚C to +125˚C, 1000 cycles) 0.045˚C-cm2/W Note: This product is a phase change material. During air transport, the cabin and local climate may cause slight deformation of the product's edge, which does not affect normal use. If unacceptable, please do not buy. Please allow 1-3mm error due to manual measurement. Please make sure you do not mind before bidding. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x PTM7950 Thermal Pad 1 x Sticker