Two styles of compatible remote controls compatible with HORMANN ECOSTAR. 100% compatible with ECOSTAR RSC2 and ECOSTAR RSE2. Features:
1. Free battery
2. Free coding instructions
3. Free keychain
4. Robust design
5. Built-in battery
6. Button protection

Specifications:
1. Type of programming: Programming with receiver
2. Number of channels: 43
3. Code: Rolling code
4. Frequency: 433.92 MHz
5. Range: 10-50 m (open space)
6. Power: 12V 27A
7. Remote control comes with battery
8. Modulation mode: ASK (AM)
9. Power: 100mW
10. Working temperature: -20 C to +50 C

Security of use: Dynamic code provides a high level of security, code that cannot be copied.

Disclaimer: Your old remote control must be the same as the one advertised, new remote control is not compatible with other remote controls.

Contains:
1x Remote control
1xBattery
1xKeychain
1xEnglish manual

How to program:
1. Press a button on the receiver (under the cover or next to the motor in a separate box).
2. Then press a button on the new remote control to register it.

Materials required:
Compatible programming: Your receiver
1. Open your garage door receiver.
2. Press the programming button. The inscription is usually: ENR, MEMO or PROG.
3. On some receivers, it is necessary to hold down the programming button.
4. On the receiver, the LED light indicates the start of programming mode.
5. Press compatible for one second on a button on the new remote control and release it again.
6. The receiver's LED light will light up differently or turn off to indicate successful programming.
7. Wait a few seconds to exit programming mode.

Congratulations! Your new remote control is programmed.