The inflatable stand-up board adapter allows you to connect any standard electric pump, foot pump, or compressor to the valve connection, the standard valve for car and bicycle tires.
It works on most inflatable stand-up boards. It is also suitable for boats and kayaks that also use the valve for inflation. Use your compressor or tire pump to easily reach 20 PSI. Be very careful not to overfill your board or craft, and check the board's pressure frequently.
This is an adapter only. The speed at which your board inflates depends on the pump used. Since compressors/tire pumps take time to inflate, it is recommended to inflate the board with a hand pump until it becomes difficult to pump, and then use the adapter to top up the pressure.
Remove your SUP valve cap and ensure the valve is sealed for inflation by turning the central pin to the outer/closed position. Insert the valve adapter into the SUP valve in the same way you would insert the pump's hose nozzle. Connect any standard pump to the valve adapter connection to inflate your board. Monitor the board's pressure frequently during inflation!