* New and high quality* Made of high-quality materials,* JR1810RX 6-12V children's electric vehicle control box ZCY1810RX receiver 5 pin and 7 pin* Connect the remote control and receiver* Remote control receiver for children's electric vehicles.* Press and hold the forward and backward buttons simultaneously, the indicator light flashes, then turn on the car. The indicator light stops flashing and the connection is successful.* Different styles, better choice.* First use (or battery replacement) requires a matching frequency.* Step 1. Insert two AAA 1.5V batteries (note the positive and negative polarities in the battery compartment) and finally close the battery cover, and the indicator light will flash 3 times, indicating that the battery is correctly installed.* Step 2. Press and hold the frequency button (car selection) for about 2 seconds, and the indicator light will flash.* Step 3. Turn on the car and the light went out.* Step 4. If the matching frequency fails (the indicator light does not go out), turn off the power and repeat steps 2 and 3.Specifications:Type: Baby car accessoriesColor: As shown in the pictureModel (optional): Remote control, ZCY1810RX 5pin, 5 pin Complete set, ZCY1810RX 7pin, 7 pin Complete setPackage includesList 1:1 x remote controlList 2:1 x receiverList 3:1 x remote control + 1 x receiverNote:1. The real color of the item may be slightly different from the pictures shown on the website caused by many factors such as brightness of your monitor and light brightness.2. Please allow slight manual measurement deviation for the data.