With the inflatable valve adapter, you can connect any standard electric pump, floor pump, or compressor to the Schrader valve, the standard valve for car and bicycle tires.

It works on most inflatable boards. It is also suitable for boats and kayaks that also use the Roberts valve for inflation. Use your compressor or tire pump to easily reach 20 psi. Be careful not to over-inflate your board or boat and check the board pressure regularly.

This is an adapter only. The inflation speed of your board depends on the pump used. Since compressors take time to inflate, it is recommended that you inflate the board with the hand pump until it becomes difficult to inflate, and then use the adapter to inflate the pressure.

Remove your SUP valve cap and ensure the inflation valve is sealed by turning the center pin to the outer/closed position. Insert the valve adapter into the SUP valve in the same way you would use the pump hose nozzle. Connect any standard Schrader pump to the valve adapter to inflate your board. Monitor board pressure frequently during inflation