KEROX K35B 35mm Mixer Tap Cartridge Replacement. Please note that the cartridge you will receive does not have the grey restrictor on it. If your K35B has a grey restrictor on top, the new version without the restrictor will work for you as it does not affect the cartridge's compatibility. Product: Tap Cartridge Installation: Push Fit Material: Alumina Ceramic KEROX cartridge K-35B is suitable with but not limited to taps from: - Cascade - La Torre - Kohler Al2O3 Ceramic Disc Cartridge Al2O3 is the chemical formula for aluminium oxide, a compound of aluminium and oxygen. Sintered by heat into ceramic, cartridges made from the material are considered durable with a compressive strength of at least 2,000 megapascals (MPa) and are said to have almost the same toughness as a diamond with a hardness of up to 19 gigapascals (GPa). It is less prone to corrosion and can last longer than cartridges made from other material. Another characteristic of alumina ceramic is its ability to glide, which is practical for a ceramic disc tap. Two discs are used in such a tap mechanism. The upper disc moves as the tap is turned on and off while the lower disc remains static. The discs glide to align or misalign, which acts as a gateway to open or impede the flow of water. Check out other Kerox cartridges we provide. Features of Kerox K-35B Tap Cartridge KEROX K-35B is a 35mm single lever cartridge made of Al2O3 engineered ceramic. It has a surface roughness of 0.2 micrometres (m) and a contact surface of 50 to 80 percent. It opens at a 25-degree angle with a maximum mixing angle of 90 degrees. The highest temperature that can be achieved with this cartridge is 90 ℃ (194 ℉). The flow rate allowed by the K-35B is from 20.1 litres per minute up to 26 litres per minute. Accessing and Replacing a K-35B Cartridge The single lever cartridge is housed in a manual lever tap. To repair the tap, first turn off the tap's water supply and lift the tap handle to the on position to prevent the seals on the replacement from being stressed. 1: Remove the tap handle by using an Allen key to loosen the grub screw. 2: Remove the shroud by hand with an anti-clockwise twist. 3: Remove the brass collar holding the cartridge secure using an appropriate size of spanner. The cartridge should pull out with ease. 4: Apply appropriate silicone grease to the O-rings of the new cartridge. Wiggle the new cartridge into the valve until it is fully seated. 5: Re-attach and tighten the collar, shroud, and handle. The Kerox K-35B is eligible for next day delivery, provided it is ordered before 3 pm from Monday to Friday.