Flame failure valve with inlet and outlet with Flare thread 5/8-18UNF
Only suitable for low pressure application (max BTU rating: 50000)
Suitable for gas grill, heater, fire pit, fireplace if connections
Specifications:
600mm thermocouple with M8*1 threaded head
Bakelite knob OD 38mm, D-shaft 6.1mm
Operating Instructions
1. Fix the valve on a plate or board of your grill or fire pit with the main screw and flange.
2. Your inlet and outlet hose on the inlet and outlet side. (fasten it tightly enough to avoid gas leakage)
3. Fasten the M8 thermocouple nut to the valve end tightly (Please check if your valve end thread is 8mm before buying)
4. Thermocouple and end thread
5. Open the gas by size knob and push your valve for around 5-10 seconds until the thermocouple head is heated enough.
6. Release your hand and it works properly. If the gas valve shuts off again when you release your hand, please check
If your thermocouple is always heated
If the thermocouple end is connected to the valve
If the inlet and outlet side with hose you have
Color: yellow
Material: copper
Package Contents:
1 x Gas Control Valve
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.