Usage tips: Flame failure valve with inlet and outlet with Flare thread 5/8-18UNF
Only suitable for low pressure applications (max BTU value: 50000)
Suitable for gas grill, heater, fire pit, fireplace if same connections
Specifications:
600mm thermocouple with M8*1 threaded head
Bakelite knob OD 38mm, D-shaft 6.1mm
Instructions for use
1. Fix the valve to a plate or board on your grill or fire pit with the main screw and flange.
2. Connect your inlet and outlet hose on the inlet and outlet side. (fasten it tightly enough in case of gas leakage)
3. Fasten the M8 thermocouple nut to the valve end tightly (Check if your valve end thread is 8mm before purchasing)
4. Connect the thermocouple and the end thread well
5. Open the gas with the correct size knob and press the valve for about 5-10 seconds until the thermocouple head is heated enough.
6. Release your hand and it works correctly. If the gas valve turns off again when you release your hand, check
If your thermocouple is always heated by the flame
If the thermocouple end is well connected to the valve
If the inlet and outlet side are well connected to the hose you have
Color: yellow
Material: copper
Package contents:
1 x Gas control valve
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.