Welcome to our store!

1. Heated Handle: This heated handle has 3 temperature gears, and the simple and precise adjustment ensures great comfort in winter. 2. Smart Design: There are grains on the surface of the handle, and the non-slip design promises safe handling and riding on your way. 3. Easy Adjustment: Allows you to change the temperature without removing your hands from the handles, making riding safer. 4. Application: The handlebar diameter is 22 mm, which is 7/8 inch, perfectly suitable for all motorcycles and ATVs, also very easy to install. 5. Good Material: Made of TPV and aluminum alloy, the durable handle warmer is resistant to high temperature and corrosion.

Item Type: Motorcycle Heated Grip
Material: TPV + Aluminum Alloy
Color: Black
Input Voltage: 9-18V
Working Voltage: 12.4V-16V
Processing Temperature: For temperature 0-50℃.
Power: About 20-40W
Applicable Models: General for 22 mm / 0.9 inch (approx.)
How to Use:
1. Pour part cleaner or lubricant into the center of the handle cover and the handle and shake it back and forth, then you can pull out the handle cover and save it for future use; if you no longer need it, you can cut and remove the handle cover with a knife. Follow the respective removal methods for metal handles.
2. Pull out the throttle cable from the throttle core before replacing the throttle accessories. If the cable is too hard, a strong pull will cause danger, make sure to pull the cable loosely before pulling it out.
3. Loosen the cable inside the throttle core a little. If the throttle core is replaced, adjust the throttle cable tension to an appropriate tension. When adjusting, make sure the throttle valve can operate smoothly.
4. Apply glue to the handle, if it is too thick it can seep out and cause stains. Use a thick cardboard or a scraper to spread the glue thinly, and then insert the handle cover. There is a hex screw on the control side, make sure to loosen the screws before inserting, and then tighten them at last.
5. After the power is turned on, the indicator light flashes three times and enters standby mode (green light flashing means normal, red light flashing, it is less than the operating voltage). The heater allows five-speed temperature adjustment. Through the switch control, the light changes from blue to red, and the output will gradually increase at a rate of 20% each time. If the light flashes or goes out, it means the voltage has dropped and you need to change the battery or change the wiring. Connection method: red connects to positive pole, black connects to negative pole.

1 x Pair of Motorcycle Heated Grips

1 x Washer

2 x Bracket

Customers are our top priority. If you find any problems with your product after receiving it, such as damage or incorrect quantity, please contact us immediately. We strive to provide you with the best after-sales service.