Make your oil change quick and easy with our 12V Oil Change Pump / Diesel Pump. Avoid spills and unnecessary hassle and get the job done smoothly and efficiently.

The crocodile clips allow you to easily connect the pump to the battery.
The pump has a bracket so it can be easily mounted where needed.
Easily sucks up oil through the dipstick hole on the engine.

Specification:

Rated voltage: DC 12V
Rated power: 60W
Max pressure: Max. 0.8 MPa
Maximum flow: 5L / min
Pump Diameter: approx. 4.8 cm, length: approx. 14.5cm
Outlet pipe diameter: approx. 10mm x 137cm (Dia. * L)
Inlet pipe diameter: approx. 8 mm, 6 mm, length: approx. 110cm
Cable length: approx. 68cm
Clip length: approx. 8cm
Color: Black

How to use:
1) Start by running the car engine for a while, when the oil temperature reaches about 50 degrees, start pumping oil.
2) Connect the pump to the power, run it for a while and observe if the inlet and outlet are normal.
3) Then open the filler cap, remove the dipstick, force the hose to the bottom of the oil pan.
If no oil comes out or it pumps very slowly or intermittently, it is generally caused by loose hoses and hose parts. You must reinstall hoses and fittings.
4) After oil pumping, remove the hose and then run the pump for a while, pump out residual oil inside the pump clean or pump water for a while until the pump head becomes clean.
5) If you have not used it for a long time, it may not suck, just pour water into the pump and run the pump for a few minutes until the air is completely out.

Package includes:
1pc x oil pump
1pc x 10mm outlet pipe
1pc x 8mm hose
1pc x 6mm hose

Note:
If you want to connect this pump to mains power, you need a power converter.
Please allow 1-5 mm deviation due to manual measurement.
Due to light and screen difference, the item's color may be slightly different from the pictures.