Description Compatibility: Fits Seastar hydraulic steering systems. Used to refill the boat's steering fluid system. Advantages 1. Used to refill the boat's steering fluid system. 2. Standard Seastar helm to bottle connection - do not puncture the bottle 3. Custom bridge tube connects bleed ports on the steering cylinder. Installation Instructions: 1. Attach the bottle to the helm reservoir (do not puncture the bottle) (do not allow the bottle to run empty) 2. Connect the bridge tube to the bleed fittings on the steering cylinder and loosen/open the fittings. 3. Use the helm to pump fluid through the system by turning the wheel in one direction. Air bubbles will be forced to the reservoir at the helm. 4. Manually turn the outboard engine through full articulation to relieve trapped air and confirm good bleeding. 5. Note: Directing the bleed fittings upwards while pumping fluid with the helm allows air to escape from the cylinder. 6. Repeat 3-4 as needed until no air is visible in the bridge tube. 7. Tighten the bleed fittings before removing the bridge tube. Package includes: 1 set x Boat Bleed Kit Fill Kit