Power: 10W, Max. Flow Rate: 3000L/H, Max. Flow Height: 2.0m, Outlet Adapter: 20-25-32mm

Long service life and high corrosion resistance, thanks to the use of ABS material for the casing and the ceramic spindle. Motor winding made of 100% good quality and high performance copper wire.

Used for total submersion, in fresh water and sea water, suitable for freshwater or saltwater aquariums, ponds, garden ponds, fountains.

There is no filter in the pump. Thanks to the filter cover, it is easy to filter fine particles and impurities, the water hardly clogs, so that filtration becomes more efficient, the service life is extended, and maintenance time is reduced.

Under no circumstances should the water pump operate without water (dry running). This can damage the pump shafts. Before starting, the pump housing must be filled with clean water.

The water pump should not be placed directly in the sludge at the bottom, and its position should be raised, otherwise its service life will be shortened. If the water environment is cloudy, it is recommended to clean the filter cover and internal units every two weeks. Normally, it should be cleaned once every four weeks.