Horizontal Wedge Tile Spacer Kit for Floor and Wall Tile Leveling System, Leveling Positioner with Wrench
Hand-operated construction tools Features:
Durable and reusable.
Easy to use and suitable for DIY projects.
Keeps tiles balanced and level.
Increases tile installation speed.
Reduces installer fatigue/stress.
Flat and virtually lip-free surface.
Reduces the need for grinding or polishing.
Prevents tiles from moving during curing.
Specifications: Material: PP + Stainless Steel
Applicable spacers: 2mm-8mm/0.08-0.31in Tile thickness: 5mm-20mm/0.2-0.79in Comes with 3 packs of tile leveling crosses of different specifications, suitable for different occasions: Leveling crosses:
Specifications: 1.0mm/0.04in, thickness 2.5mm/0.1in, length 22mm/0.87in, use: seamless tiles, polished tiles
Leveling crosses: specification 2.0mm/0.08in, thickness 2.5mm/0.1in, length 22mm/0.87in, use: wall tiles, ceramic tiles. Leveling crosses: specification 3.0mm/0.12in, thickness 2.5mm/0.1in,
length 23mm/0.91in, use: antique bricks, exterior bricks.
Usage suggestions:
1. Lay the first tile,
leave an appropriate distance (used with cross spacers). Close to the tile.
2. Insert the T-shaped pin along the gap between the tiles.
3. Then rotate it 180 degrees and the T-shaped pin will be wedged into the bottom of both tiles.
4. Adjust the cap by hand/special wrench until both tiles are level.
5. Approximately 4 to 6 hours after leveling, before the cement/adhesive is completely dry, turn the cap upside down and remove the T-shaped pin 180° until the word is removed.
Note:
Due to different monitors and lighting effects, the actual color of the item may differ slightly from the color shown in the picture. Thank you!
Please allow 1-3mm measurement deviation due to manual measurement.