This LC v2F module can generate different frequencies depending on different input voltages, and it can convert 0-10V voltage to 0-10KHz frequency pulse signal.

Operating Voltage: 13.5V-30V

Input Controllable Voltage Range: 0-10V

Output Frequency Range: 0-10KHz



Specification:



Interface Definition

VCC: operating current

GND: power ground

IN+: input voltage

IN-: input ground

OCOUT: signal collector output port (if used with driver, it can be used)

FOUT: frequency output port (universal frequency output port)

Two independent outputs, OC-OUT is NPN, and FREQ-OUT is IC output. The common cathode end is with the negative GND of the power supply. When common anode is connected, it is used with power positive. If the connection is common anode and the power supply is 13-24V, please series connect a 2.7K ohm resistor; if the power supply is 12V, please series connect a 330 ohm resistor.

Connect the frequency pulse signal to F, and there is a corresponding voltage output at the terminal. Correspondence between input and output: 1V=1KHZ 10V=10KHZ. If there is a deviation, you can adjust the potentiometer on the board to calibrate.



Package includes:



1 Piece Voltage to Frequency Conversion Module