Product Parameters
Water timer with ball valve design for irrigation control. It is suitable for mounting on a 3/4 inch, 19mm faucet and uses an EU standard thread. The working pressure range is 0 to 8 bar, 0 to 116 PSI, and the working temperature range is 5 to 60 degrees Celsius, 40 to 140 degrees Fahrenheit. The unit is powered by 2 x AAA 1.5V alkaline batteries, not included. The package contains 1 timer. Please note that manual measurement may cause a slight size deviation, and the actual color may vary slightly due to different screen displays.

Core Features
This irrigation timer supports adjustable watering frequency and adjustable run time for scheduled use. The frequency can be set to 1, 2, 3, 4, 6, 8, 12, 24, 48, 72 hours or weekly, while the run time can be set to 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes. Manual watering is available with on and off control. It features a StrongBall valve inside and a Norain sensor hole. Once the program is set, it repeats the cycle until new settings are applied. The top cover should be closed tightly to prevent water from entering.

Suitable Scenarios
Designed for automated irrigation tasks where regular watering intervals are needed. It can help manage watering for garden and outdoor faucet-based irrigation systems that use a compatible 3/4 inch connection and EU standard thread. It is intended for regions or systems that match the specified thread standard and is not for use in CA and USA.

Product Summary
This water timer offers timed irrigation control with adjustable frequency, adjustable duration, and support for manual watering. With battery-powered operation, repeated cycle programming, and compatibility with 3/4 inch EU standard threaded faucets, it provides a practical solution for routine water management.