Fitment: Fits most awnings on RVs and campers, including A&E 8500 and 9000 awnings.

Material: Made of steel-aluminum that maintains strength without rusting. The thick steel mandrel can fit through the materials you are connecting.

Handle Gloves: The polyethylene material on the handle can keep the handle smooth and without slipping. And the shape design conforms to the fingers.

Easy to Install: Align previously drilled or punched holes, apply pressure to the mandrel and secure the rivets in place, then pull the rivets through them.



Size:

Handle Lift:

The base is 3-1/2 inches x 1 inch.

Two 1/4 inch dia.

The size between the rivet mounting holes is 2-3/4 inches center to center.

The handle is 5 inches long.

Installation:

Handle Lift:

Step 1: Remove the old rivet from the old lift handle with a drill.

: Place the new lift handle in the punched groove on the main arm and align the rivet holes.

Step 3: Insert the rivet through the hole in the main arm, place the hex nut over the rivet shaft and tighten against the rivet.

Step 4: Secure the lift handle by tightening the rivet with a rivet gun.

Rafter Rivets:

Step 1: Choosing the right rivets

Rivets are available in a variety of materials, first considering aesthetics and whether it is prone to shifting after installation.

Rivets are available in a variety of materials. The first thing to consider is aesthetics and whether it is easy to move after installation. Our products are made of steel core and easily pass through two different materials.

: Remove the rivets with a cleaning cloth or sandpaper to prevent slipping.

Step 3: Always check your positioning carefully and then align the holes that are punched or drilled and pass the rivets through them.

Color: As shown

Material: ABS+Metal



Package Contents:

1 x Rafter Rivet

1 x Handle Lift



Only the above package content, other products are not included.

Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.