REMOTE CONTROL COMPATIBLE WITH FAAC TM1300, TM2300, TM3300:

This remote control is compatible with the FAAC TM 300 series (as shown in the image above). The compatible model must have the generic text TM300, TM300S or TM1 300 or TM2 300 or TM3 300 depending on the number of buttons, the 12 coding dip-switches (microswitches) (10 on old models). If the model text is no longer visible on the back of the remote control, open the container and check the electronic board, it should have a screen print or label with the code. Dimensions (5.5x3.5x1.3) cm.

FEATURES:
Self-learning of the code directly from the original remote control. Made of ABS and aluminum with a refined and modern design. It is equipped with a 27a 12v battery already included in the remote control. It has the ability to memorize up to 4 commands (all on the same frequency). Fixed code fixed at 330 mhz.

PROGRAMMING INSTRUCTIONS:
Press and hold simultaneously \"Open\" and \"Close\", the LED light will flash 3 times, then release only the \"Close\" button and press it quickly 3 times. The LED light will start flashing, then release the \"Open\" button as well. Place both remote controls back to back. Press and hold the button on the remote control to copy, then press and hold a button on the universal remote control you want to program and hold both buttons until the LED light flashes continuously.
NOTE: A color of the buttons or the body of the remote control that differs from that in the image compromises compatibility.

NOTE: To receive an invoice, it is necessary to send a message directly to the seller with all billing data including PEC or Recipient Code.