FeatureMaterial: PP ResinSize 3636cmLaying out the effect like blocksSo the path is more exotic, to create your own garden path.Color: BlackDIY plastic molded paving mold is spread in Europe and America, is a personalized brick moldHow to use this concrete paver mold to build the walkways:Step 1:Mix cement with water according to package directions. When ready to use, the concrete should have the consistency of oatmeal and be thick enough to hold an edge when cut with a spade.Step 2:Fill the paver mold, scoop in the concrete with a spade, making sure to fill each area.Step 3:Using rubber gloves, spread the concrete around the mold, filling in any gaps or low spots. Tap the mold with your hand to eliminate any air bubbles.Step 4:Following the contours of the mold, smooth out the concrete and wipe away any excess.Step 5:Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next section, rotate the mold a quarter turn and place it next to the paver just completed, angling it slightly if you are creating a curved walkway.Step 6:After allowing the concrete to cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly formed pavers to help them settlePackage includes:1 x Concrete Paver Path Walk Maker Mold